Skip to content
English
Customer portal
Go back to yellowscan.com
  • There are no suggestions because the search field is empty.

Difference between point cloud and GCP

List of checks to explain height difference between point cloud and GCP, using trajectory post-processing in CloudStation

There are several explanations to this issue. 

  •  in CloudStation / Generate SBET, check the Payload Configuration : the Preset used, the lever arm values, and the orientation. 

  • in CloudStation / Generate SBET : check the base station coordinates by editing the station used in the SINGLE BASES list. 
    Parameters to be checked are : the coordinates themselves (1), if they match the Reference Frame and Epoch (2), the Antenna height, and measurement method (ARP or APC ) (3).

Base_editBase_edit2-1

  • iin CloudStation / Generate SBET, at the Export Parameters stage,  check that the geoid model in used is the right one (4) , or even if Ellipsoidal height should be selected.
  •  in CloudStation / Generate SBET, at the Export Parameters stage, check that the reference frame used and epoch used match the GCP reference frame/epoch (5) (if point cloud would be compared to GCP) 

Export_param-1

  • Think that a height difference can also be the consequence of a planimetric shift.